Matrix Amplification XT1000 Bedienungsanleitung PDF herunterladen (Seite 11)

XT SERIES USER MANUAL 10

5. Cables, Making your own.

5.1 Signal Level Leads.

Standard Audio Connectors:

Cable Maker Table:

Cable Connections:

Cable Type: Ground/Screen Red/Central Cable White

balanced to balanced 1 to 1 2 to 2 3 to 3

balanced to unbalanced 1 to 1 2 to 2 3 tied to 1

unbalanced to unbalanced 1 to 1 2 to 2 -

Note: Shell Ground tab on XLR connectors is usually tied to ground at pin 1.

Choosing a Cable:

For balanced connections, use a good quality metal braid screened cable with two inner wire

cores; this will usually be clearly marketed as pro audio/microphone signal cable.

For long cable runs in excess of 6m/20ft, try to use cables with lower capacitance ratings, to

minimise any loss of sound quality. Keep cable runs short where possible, however be sure allow

a little bit of slack in the length of cable used to make the lead. Stretched, overstressed cables

tend to break at the most inconvenient moments.

MATRIX AMPLIFICATION REV.1.17

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Keine Kommentare

Matrix Amplification XT1000 Bedienungsanleitung Seite 11